OGS扫边机

OGS扫边机主要用途：

该机适用于玻璃、蓝宝石等非金属硬脆性材料制作的薄片零件的多面成型抛光，如OGS玻璃扫边抛光。It’s used for polishing multi-surface non-metal and brittle material, such as the perimeter sides of OGS glass, sapphire, etc.

OGS扫边机主要特点：

1.本机可对薄片零件的周边进行抛光，一次可装夹多片。

2.左右两个抛光头同时对工件抛光，由伺服电机通过丝杆驱动抛光头，相对工件做插补运动，抛光压缩量稳定，抛光效率高。

3.左右抛光头通过直线导轨同时由丝杆升降机驱动做同步上、下直线运动，使玻璃抛光均匀，不会出现纹路，抛光效果好。

4.配有喷液装置，抛光液通过砂泵电机，从两个抛光头内部喷出，均匀的喷射在工件上。

5.抛光头采用抛光皮制作，可以达到理想的抛光效果。

6.通过在人机界面编辑好加工程序，再下载至PLC，PLC就会按当前下载的程序运行。

7.采用PLC控制，控制方式灵活可靠。

8.用触摸屏做为人机界面显示报警和机床状态的实时信息；介面友好信息量大。

9.控制元器件均采用24V电源，PLC电源采用隔离变压器供电，降低外界电网杂波干扰提高了机床的稳定性。
 

1.Polishing the perimeter sides of a stack of thin workpiece at the same time

2.Polish the workpieces with interpolation motion by 2 polishing head at the same time,driven by servo motor and lead screw, stable amount of polishing compression, high polishing efficiency 

3.Vertical motion of polishing heads, driven by lead screw lift and linear guideway to make polishing smooth, no trace.

4.Spray system of polishing liquid, supplied by sand pump, spray to workpiece uniformly from polishing heads inside

5.Polishing pad or bristle of polishing heads, to make sure ideal polishing effect

6.The machine at work through the editing processing procedure on HMI, and then downloaded to the PLC, PLC will be run by the current downloaded program

7.PLC controlling, which it is flexible and reliable

8.Touch screen, it is convenient to show alert information and real situation. Besides, the interface is friendly and the information is huge.

9.24VDC of control components, PLC is supplied by isolation transformer, external electric wave interference is lowered, and the safety of the machine is greatly raised.

主要技术参数 Main technical perameters